iSCSI GbE to SAS/SATA II RAID Subsystem
104
User Manual
13.
Click
“Apply”
.
14.
Run
“Device Manage”
in Windows. Make sure MPIO device is available.
15.
Done.
The MC/S setup instructions are in the following:
1.
Create RG/VD, and then attach LUN.
2.
Add the first “Target Portal” on Microsoft iSCSI initiator, For MC/S, there is
only ONE
“Target Portals”
in the
“Discovery”
tab.
3.
Logon.
4.
Then click
“Advanced…”
.
5.
Select the first “Source IP” and “Target Portal” to iSCSI data port 1. Then click
“OK”
.
6.
After connected, click
“Details”
, then in the
“Session”
tab, click
“Connections”
.
7.
Choose
“Round Robin”
in
“Load Balance Policy”
.
8.
“Add”
Source Portal for the iSCSI data port 2.
9.
Select the second “Source IP” and “Target Portal” to iSCSI data port 2. Then
select
“OK”
.
10.
Done.
