iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
103
F. MPIO and MC/S setup instructions
Here is the instruction to setup MPIO or MC/S. The following network diagrams are the
examples. Please follow them to setup the environment. Be reminded that the host
must have multiple NICs which are set up with different IPs.
The MPIO setup instructions are in the following:
1.
Create RG/VD, and then attach LUN.
2.
Add the first “Target Portal” on Microsoft iSCSI initiator.
3.
Add the second “Target Portal” on Microsoft iSCSI initiator.
4.
Logon.
5.
Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.
6.
Select the first “Source IP” and “Target Portal” to iSCSI data port 1. Then click
“OK”
.
7.
Logon again.
8.
Enable
“Enable multi-path”
checkbox. Then click
“Advanced…”
.
9.
Select the second “Source IP” and “Target Portal” to iSCSI data port 2. Then
click
“OK”
.
10.
iSCSI device is connected. Click
“Details”
.
11.
Click
“Device”
tab, then click
“Advanced”
.
12.
Click
“MPIO”
tab, select
“Load Balance Policy”
to
“Round Robin”
.
