iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
105
G. Trunking / LACP setup instructions
Here is the instruction to setup Trunking and LACP. The following network diagrams
are the examples. Please follow them to setup the environment. Remind that gigabit
switch must support trunking or LACP; otherwise these functions can not work. The
running path in trunking or LACP mode is decided by an operation of MAC addresses of
host and target. It’s better to prepare two or more hosts. Fortunately the performance
can be increased obviously.
The setup instructions are in the following:
1.
In
“/ iSCSI configuration / NIC”
, click the button “
”.
2.
Decide to use Trunking or LACP, and then select at least two NICs for link
aggregation. For example.
