iSCSI GbE to SAS/SATA II RAID Subsystem
User Manual
47
Step 2:
Please select the combination of the RG capacity, or
“Use default
algorithm”
for maximum RG capacity. After RG size is chosen, click
“
”.
Step 3:
Decide VD size. User can enter a number less or equal to the default number.
Then click “
”.
Step 4:
Confirm page. Click
“
” if all setups are correct. Then a
VD will be created.
Done.
You can start to use the system now.
A RAID 0 Virtual disk with the VD name “QUICK13573”, named by the system itself, with
the total available volume size of 1862GB.
