PRONAR T682, Manual

Page: 49 / 131

SECTION 3 Pronar T682, Pronar T682
3.5
3.2.2 LOAD BOX
FIGURE 3.3 Load box – front view
(1) load box, (2) set of wall extensions, (3) window, (4) platform ladder, (5) extension ladder
The trailer load box (1) is a welded structure made from steel plate and shapes. – figure
(3.3). The box trapezoidal system enables easier unloading of transported materials. The
load box is mounted on the lower frame using tipping pins. In the front (the front wall), two
inspection windows (3) were placed, and a ladder (4) was screwed on. The load box can be
equipped with 580 mm or 700 mm wall extensions (2) (additional equipment), then an
additional ladder (5) is mounted to the front extension. A ladder and folding side steps (not
shown in the figure), located on the inside of the load box, allow entry to the load space.