SECTION 1
Pronar T682, Pronar T682/1
1.13
A correctly secured machine does not change its position with regard to the transporting
vehicle. The securing elements must be selected according to the guidelines of the
Manufacturer of these elements. In case of doubt apply a greater number of securing straps
in order to secure the load. If necessary, cover the sharp edges of the machine in order to
protect the securing elements from tearing or breaking during transport.
DANGER
Incorrect use of securing measures may cause an accident.
During reloading work, take special care not to damage any accessories or paint finish. The
tare wight of the machine is given in table (3.1).
IMPORTANT
When shipped by road on a motor vehicle the machine must be mounted on
the vehicle's platform in accordance with the safety requirements and
regulations.
Vehicle driver should be especially careful when driving. This is due to the
vehicle's centre of gravity shifting upwards when the machine is loaded.
Use only certified and technically reliable securing measures. Carefully read
the information contained in the Operator's Manuals for the given securing
measures.
1.5.2 INDEPENDENT SHIPPING BY THE USER
In the event of independent shipping by the user, carefully read the
OPERATOR’S MANUAL
and follow its recommendations. Independent transport involves towing the machine with own
agricultural tractor to destination. During shipping adjust ground speed to the prevailing road
conditions, but do not exceed the maximum design speed.
Summary of Contents for T682
