PRONAR T682, Manual

Page: 30 / 131

Pronar T682, Pronar T682/1 SECTION 2
2.4
•
The machine unhitched from tractor must be immobilised with parking brake. If
the machine is positioned on a slope, it should be additionally secured against
moving by placing chocks under the machine's wheels. Terminals of hydraulic,
electrical and pneumatic conduits should be protected against contamination.
2.1.3 HYDRAULIC SYSTEM AND PNEUMATIC SYSTEM
•
When operating, the hydraulic and pneumatic systems are under high pressure.
•
Regularly check the technical condition of the hydraulic line and all connections.
There must not be any leaks of hydraulic oil.
•
Before proceeding to maintenance-repair work, make certain that the hydraulic
system is not under pressure.
•
Rubber hydraulic lines must be replaced every 4 years regardless of their
technical condition.
•
Use the hydraulic oil recommended by the Manufacturer.
•
After changing the hydraulic oil, the used oil should be properly disposed of. Used
oil or deteriorated oil should be stored in original containers or replacement
containers resistant to hydrocarbons. Replacement containers must be clearly
marked and appropriately stored.
•
Do not store hydraulic oil in packaging designed for storing food or foodstuffs.
2.1.4 LOADING AND UNLOADING
•
Loading and unloading work should be carried out by persons experienced in this
type of work.
•
The trailer is not intended for transporting people, animals or hazardous
materials.
•
The load must be arranged in such a way that it does not threaten the stability of
the trailer and does not hinder driving.
•
The arrangement of the load may not cause an overload on the axle and drawbar
of the trailer.