PRONAR T682, Manual

Page: 32 / 131

Pronar T682, Pronar T682/1 SECTION 2
2.6
•
When closing or opening the rear grain chute gate, be very careful to avoid
crushing your fingers.
•
Do NOT go or place hand between open tailgate and load box.
2.1.5 CLEANING, MAINTENANCE AND ADJUSTMENT
•
During the warranty period, any repairs may only be carried out by warranty
service authorised by the Manufacturer. After the expiry of the warranty period it
is recommended that possible repairs to the trailer be performed by specialised
workshops.
•
In the event of any fault or damage, do not use the trailer until the fault has been
fixed.
•
When servicing, use appropriate, close-fitting protective clothing, gloves, shoes,
glasses and the correct tools.
•
Any modification to the trailer frees the manufacturer from any responsibility for
damage or detriment to health, which may arise as a result.
•
The trailer can only be stood on when it is absolutely motionless and the tractor
engine is switched off. Tractor and trailer should be immobilized with parking
brake and chocks should be placed under the trailer wheels. Ensure that
unauthorised persons do not have access to the tractor cab.
•
Regularly check the condition of nut and bolt connections, in particular
connections of drawbar eye with drawbar and wheel nuts.
•
Service inspections should be carried out according to the schedule in this
Operator's Manual.
•
Lower the load box before proceeding to deal with a malfunction. If it is necessary
to raise the load box, it should be tipped to the rear and secured against dropping
with the aid of load box support. The load box may not be loaded. The trailer must
be hitched to the tractor and secured with chocks and parking brake.
•
Before beginning repair work on hydraulic or pneumatic systems reduce oil or air
pressure completely.