PRONAR T682, Manual

Page: 79 / 131

SECTION 4 Pronar T682, T682/1
4.15
DANGER
If there is a danger of load packaging moving, do NOT transport this type of
material. A moving load constitutes a serious hazard during travel for the tractor
driver and other road users.
Materials which may cause corrosion of steel, chemical damage or react in any other way
negatively affecting the trailer structure may be transported only on condition of appropriate
load preparation. Materials must be tightly packed (e.g. in plastic or paper bags, etc.). During
transport, packaging contents may not come into contact with load box. Therefore, ensure
the appropriate tightness of containers.
Due to diversity of materials, tools, methods of fixing and securing the load, it is impossible to
describe all methods of loading. While working be guided by caution and own experience.
The trailer user must carefully read the regulations concerning road transport and comply
with them.
DANGER
Overloading the trailer, erroneous loading and securing of the load is the most
frequent cause of accidents during transport.
The load must be arranged in such a way that it does not threaten the stability
of the trailer and does not hinder driving.
Ensure that during unloading / loading or raising the load box nobody is near
the trailer. Before tipping the load box ensure proper visibility and make certain
that there are no bystanders near the trailer.
The arrangement of the load may not cause an overload on the axle of the
trailer.
4.4 TRANSPORT THE LOAD
When driving on public or private roads, respect the road traffic regulations, exercise caution
and prudence. Listed below are the key guidelines for driving the tractor and trailer
combination.
•
Before moving off, make sure that there are no bystanders, especially children,
near the trailer or the tractor. Ensure that the driver has sufficient visibility.