PRONAR T682, Manual

Page: 114 / 131

Pronar T682, Pronar T682/1 SECTION 5
5.30
DANGER
Oil fires should be quenched with the use of carbon dioxide, foam or steam
extinguishers. Do not use water to quench oil fires.
Lubricants
For heavily loaded parts it is recommended to apply lithium greases with addition of
molybdenum disulphide (MOS
2
) or graphite. In the case of less loaded sub-assemblies the
application of general purpose machine greases is recommended, which contain
anticorrosion additives and have significant resistance to being washed away by water.
Aerosol preparations (silicon greases and anticorrosive-lubricating substances) should have
similar characteristics.
Before using the greases, read the information leaflet for a given product. Particularly
relevant are safety rules and handling procedures for a given lubricant as well as waste
disposal procedure (used containers, contaminated rags etc.). Information leaflet (material
safety data sheet) should be kept together with grease.
5.7 TRAILER CLEANING
•
The trailer should be cleaned as needed. Before using pressure washer the user
is obliged to acquaint himself with the operating principles and recommendations
concerning safe use of this equipment.
•
Use only clean running water. Cleaning detergents with neutral pH may be used,
which do not react aggressively with the trailer's structural elements.
•
The use of pressure washers increases the effectiveness of washing, but be
careful when working. During washing, washer nozzle may not be closer than 50
cm from the surface being cleaned.
•
Water temperature should not exceed 55°C.
•
Do not direct water jets at system elements and equipment of the trailer i.e.
control valve, braking force regulator, brake cylinders, hydraulic cylinders,
pneumatic, electric and hydraulic plugs, lights, electrical connections, information
and warning decals, identification plate, conduit connections, lubrication points,