PRONAR T682, Manual, Page: 82 / 131

Pronar T682, T682/1 SECTION 4
4.18
after unloading, lower the load
box by pressing the button (4),
clean the edges of the floor and
walls,
close the tailgate by pressing the
button (5) or close the slide gate,
press the button (1) to turn the
system power off, the power
indicator will turn off
Rear load box wall is equipped with chute slide
gate (1) – figure (4.3) and chute (2) (optional
equipment) which is used for unloading loose
materials. Chute design allows very accurate
dosing of the material to packaging (sacks,
boxes etc.). The opening gap can be controlled
using lever (3). In order to do that loosen the
bolt interlocking slide gate (4), open the slide as
required and lock again using the bolt. During unloading through chute, load box must be
raised slowly and smoothly. Raising the load box quickly will exert large pressure on the
tailgate due to displacement of the carried material and could compromise trailer's stability.
DANGER
Tipping the load box must be done on hard and level ground.
When opening tailgate be especially careful, because of the load pressure.
Do NOT stand behind the trailer when opening the tailgate. Keep a safe
distance.
DANGER
Use extreme caution when unloading near overhead power lines.
Be careful when closing the tailgate and slide gate. Danger of crushing limbs.
FIGURE 4.2 Controller
(1) power ON/OFF button, (2) / (4) raise /
lower the load box, (3) / (4) raise / lower the
tailgate