PRONAR PT510, Operator'S Manual

Page: 10 / 133

Pronar PT510 SECTION 1
1.4
1.1.3 LIST OF SERIAL NUMBERS
VIN
S Z B 5 1 0 X
FRONT AXLE FACTORY NUMBER
REAR AXLE FACTORY NUMBER
TIP
In the event of ordering a replacement part or in the case of the appearance of problems
it is often essential to give the factory numbers of parts or the VIN number of the trailer,
therefore it is recommended that these numbers are inscribed in the spaces below.
1.2 INTENDED USE
The trailer is designed for transport of harvested crops and agricultural products (loose, bulk
and long materials, etc.) as well as loads on EUR-pallets and pallet boxes at the farm and on
public roads. It is acceptable to transport construction materials, mineral fertilisers and other
loads, if fulfilling conditions indicated in section 4. Non-compliance with the recommendations
concerning the carriage and loading of goods described by the Manufacturer and the road
transport regulations in force in the country in which the trailer is used shall void the warranty
and is regarded as the use of the machine contrary to its intended purpose.
The trailer is not intended or designed for transporting people, animals or goods classified as
dangerous materials.
The trailer is designed according to current safety requirements and engineering standards.
The brake system and the light and indicator system meet the requirements of road traffic
regulations. The maximum speed of the trailer on public roads in Poland is 30 km/h (pursuant
to Traffic Law Act of June 20th 1997, article 20). In the countries where the trailer is used, the
limits stipulated by the road traffic legislation in force in a given country must be observed.
The trailer speed must not, however, be greater than the maximum design speed of 40 km/h.