
SECTION 5
Pronar PT510
5.33
•
Detergents should be kept in original containers, optionally in replacement
containers, but very clearly marked. Preparations may not be stored in food and
drink containers.
•
Ensure cleanliness of elastic conduits and seals. The plastic from which these
elements are made may be susceptible to organic substances and some
detergents. As a result of long-term reaction of some substances, the ageing
process may be accelerated and risk of damage increased. Rubber elements
should be maintained with the aid of special preparations after previous thorough
washing.
•
After completed washing wait until the trailer is dry and then grease all inspection
points according to recommendations. Remove excess oil or grease with a dry
cloth.
•
Observe environmental protection principles and wash trailer in a place designed
for this purpose.
•
Washing and drying of the trailer must take place at temperatures above 0
o
C.
•
After washing and drying, trailer should be greased at all control points regardless
of previous date of lubrication.
5.9
STORAGE
•
Trailer should be kept in a closed or roofed building.
•
If the machine will not be used for a long time, it is essential to protect it from
adverse weather, especially rust and accelerated tyre deterioration. During this
time the machine must be unloaded. Trailer should be very carefully washed and
dried.
•
Corroded places should be cleaned of rust, degreased and protected using
undercoat paint and then painted with surface paint according to colour scheme.
•
In the event of a prolonged work stoppage, it is essential to lubricate all
components regardless of the date of the last lubrication.
•
Wheel rims and tyres should be carefully washed and dried. During longer
storage of unused trailer it is recommended that every 2 to 3 weeks the machine
Summary of Contents for PT510
