PRONAR PT510 Operator'S Manual Download Page 114

Page: 114 / 133

Pronar PT510

SECTION 5

5.22

Reinforcing sleeve (4) of the conduit must be thoroughly depressed.

Check tightness of connections in accordance with section (5.3.2).

5.4

HYDRAULIC SYSTEM MAINTENANCE

5.4.1 PRELIMINARY INFORMATION

Work connected with the repair, change or regeneration of hydraulic system components

(tipping cylinder, valves etc.) should be entrusted to specialist establishments, having the

appropriate technology and qualifications for this type of work.

The duties of the operator connected with the hydraulic system maintenance include:

•

checking tightness and visual inspection of the system,

•

checking technical condition of hydraulic connections.

DANGER

Do NOT tip trailer with unreliable hydraulic tipping system.

Do not use the trailer if the support hydraulic system is out of order.

Do NOT use the trailer if hydraulic brake system is unreliable.

5.4.2 CHECKING HYDRAULIC SYSTEM TIGHTNESS

Required maintenance actions

Hitch trailer to tractor.

Connect all hydraulic system conduits according to maintenance instructions.

Clean connections and cylinders (tipping cylinder, supports and possibly

hydraulic brake cylinders).

Conduct test tipping of load box sideways and backwards.

Press tractor brake pedal several times

If trailer is equipped with hydraulic brake system.

Check hydraulic cylinders and conduits for tightness.

Summary of Contents for PT510






































































































































Search results

Summary of Contents for PT510

Reviews:

Related manuals for PT510

Brands by name

Popular brands

PRONAR PT510, Operator'S Manual

Search results

Summary of Contents for PT510

Reviews:

Related manuals for PT510

Brands by name

Popular brands