PRONAR PT510, Operator'S Manual

Page: 89 / 133

SECTION 4 Pronar PT510
4.25
difficult to unload. Therefore, proceed cautiously and patiently. Careless operation of trailer
may pose a danger to operators and bystanders can also cause damage to the machine.
DANGER
When closing the rear chute gate or the walls take particular care to avoid crushing
fingers.
Bulk materials loaded in excess of 1 m can be unloaded by tipping the load box to the rear
only.
Ensure that during unloading nobody is near tipped load box or load material pouring out.
Tipping may only be performed when trailer is hitched to tractor.
Do NOT tip load box in strong gusty winds conditions.
Do NOT move off or drive when load box is raised.
TIP
It is recommended to use wheel chocks in order to additionally secure the trailer during
unloading.
When unloading high-volume materials, for example branches, the trailer's rear wall may
be opened downwards. The help of a second person is recommended during unloading.
ATTENTION
It is not recommended to unload the load box by opening the walls downwards (when
lower locks of the load box are locked). Load exerting pressure on the walls may hurt the
operator or damage the trailer.
4.7 PROPER USE AND MAINTENANCE OF TYRES
•
When working on the tyres, chocks or other objects without sharp edges should
be placed under the wheels of the trailer to prevent it from rolling. Wheels can be
taken off the trailer axle only when the trailer is not loaded.
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.