173
Product Manual
Managing with the CLI
about
Usage
about
Summary
Displays utility information.
array
Usage
array [-a <action>] [-d <DaId>] [-c <array count>] [-v] array -a add [-s “<list of array
params>”] [-d <DaId>] -p <PdId list> [-c <Ld count>] [-l “<list of Ld params>”] array -a mod -d
<DaId> [-s “<list of array settings>”]
array -a del -d <DaId list>
array -a locate -d <DaId>
array -a accept -d <DaId> [-t <condition type>]
array -a addld -d <DaId> [-c <Ld count>] -l “<list of ld settings>”
array -a delld -l <LdId list>
Summary
The array command is the main command for performing advanced configuration and
maintenance tasks on disk arrays.
This command lists, creates, modifies, deletes, and locates disk arrays. It also adds and deletes
logical drives.
Note that you cannot mix Hard Disk Drives (HDD) and Solid State Drives (SSD) in the same disk
array.
