Gigabit Ethernet port LEDs
Fan Status
r
eAr
p
Anel
led
s
After
poWer
on
- v
ess
A2600/A2600
s
When system boot-up is finished, use the LEDs on the controller on the rear of the device to monitor various
functions (described below).
LED
Description
(refer to product manual for more details)
System Fan
A steady GREEN LED indicates normal fan function. A RED LED indicates fan failure, the
fan must be replaced.
Ethernet
Link/Act and Speed
The LED located on below each port, on the left side, lights green when connected, flashes
green when there is activity on the port and remains dark no connection has been estab-
lished. The LED on the lower right of each port indicates connection speed, green is 100
Mbps, ORANGE is 1000 Mbps.
Vess A2600/A2600s rear panel LEDs
43
Product Manual
Hardware Setup
