89
Product Manual
Managing with WebPAM PROe
e
s
ettings
To change Email service settings:
1. Click the
Administrative Tools
icon.
2. Click the
Software Management
icon.
3. Click on
in the Service List of the Service Management menu.
4.
Make settings changes as required:
Under
Service Setting -- Email
choose a startup type:
•
Automatic
– (default) Starts and runs with the subsystem.
•
Manual
– You start the service when you need it.
Under
Email Server Settings
• SMTP Server IP address
• SMTP Authentication under
Email Server Settings
The Yes option enables authentication.
The No option disables.
• SMTP Authentication under
Email Server Settings
Username – Required if SMTP authentication is enabled.
SMTP Authentication Password – Required if SMTP authentication is enabled.
Under
Email Content Customization
• Email Sender (From) Address – The sender’s name shown on notification messages.
• Email Subject – The subject line of the notification message.
5. Click the
Submit
button.
6. Click the
Confirm
button.
s
ending
A t
est
e
m
essAge
After email settings are completed, you can send a test email.
To send a test email message, complete email settings as described above and check the
Send a test email
option box, then click the
Submit
button.
A test email message is sent to the address you specified.