Promise Vess A2600 Product Manual Download

Page: 152 / 365

Deleting a Logical Drive (CLU)

To delete a logical drive from a disk array:

Main Menu

Disk Array Management

2. Highlight the disk array that contains the logical drive you want to delete and press

Enter

3. Highlight

Logical Drives in the Disk Array

and press

Enter

4. Highlight the logical drive you want to delete and press the spacebar to mark it.

The mark is an asterisk (*) to the left of the listing.

5. Highlight

Delete Marked Logical Drives

and press

Enter

Press Y to confirm the deletion.

Press Y again to re-confirm.

Caution

When you delete a logical drive, you delete all the data it contains.

Back up all important data before deleting a logical drive.

146

Vess A2000 Series NVR Storage Appliance

Promise Technologies

Summary of Contents for Vess A2600













































































































































































































































































































































































Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands

Promise Vess A2600, Product Manual

Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands