Promise Vess A2600 Product Manual Download

Page: 182 / 365

176

Vess A2000 Series NVR Storage Appliance

Promise Technologies

Capacity= Specifies logical drive capacity. Can be specified in megabytes (mb), gigabytes (gb) or

terabytes (tb), up to 2 decimal places. If not specified, all available capacity is used for this logical

drive.

Stripe=

Specifies logical drive stripe size. Options include 64KB,128 KB, 256 KB, 512 KB, and

1024 KB. If not specified, the default 64KB is used.

Sector=

Specifies logical drive sector size. Options include 512 B, 1 KB, 2 KB, and 4 KB. Sector

size cannot exceed Stripe size. Auto-adjusted not to exceed the maximum supported sector size of

the controller. If not specified, the default 512 B is used.

WritePolicy=

Specifies logical drive write policy.

writethru

Writes are not cached

writeback

Writes are cached

ReadPolicy=

Specifies logical drive read policy.

readahead

Reads extra data to help reduce read times of sequential data.

readcache

Caches reads the data in case the same request is made again.

nocache

No caching algorithm.

Axle=

A member element when creating a RAID10 or RAID50 or RAID60.

RAID10 have 2 axles, RAID50 and RAID60 may have up to 16 axles with up to 16 drives per axle.

PreferredCtrlId= Subsystems only. Specifies which controller the LD is preferred for LUN affinity.

Valid value is 1 or 2. If value is not specified, LUN affinity is auto balanced.

-c <array count> Specifies the number of arrays to give a summary of when used with the

-a list option. For example ‘array -a list -c3’ will give a summary for the first 3 arrays on that

controller.

Specifies the number of logical drives to be created with the -a add option.

With the -c option, all the logical drives have same settings but only one -l option=value can be

specified.

Summary of Contents for Vess A2600













































































































































































































































































































































































Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands

Promise Vess A2600, Product Manual

Search results

Summary of Contents for Vess A2600

Reviews:

Related manuals for Vess A2600

Brands by name

Popular brands