s
tep
3: A
ttAch
moUnting
BrAcket
The riser card includes a mounting bracket used to anchor the card in position. The bracket is secured to the
controller module housing with a screw on the backplate of the controller, the screw hole is revealed when the
fan module is removed. Position the bracket so that the anchor posts used to mount the riser card in position are
facing the open side of the controller housing. Then secure the bracket to the backplate of the module with the
screw included with the mounting bracket.
s
tep
4: i
nsert
riser
cArd
When the mounting bracket is properly positioned and secured, the riser card will be able to align to the
insertion into the riser card slots on the controller PCB. Insert the card into the slots so that the card is firmly
seated in place. Then anchor the riser card with the four anchor screws included with the shipment.
See illustration on next page
.
50
Vess A2000 Series NVR Storage Appliance
Promise Technologies
