12
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM470 · 4/16
www.promega.com
2.B. Switching On the GloMax
®
Navigator Instrument (continued)
4.
The Tablet PC will begin its start-up protocol. After the operating software starts, tap on the GloMax
®
Navigator Software Icon to launch the GloMax
®
Navigator software.
5.
The GloMax
®
Navigator System is now ready to use.
F
13565T
A
Exit Back
Tools Eject Help
igure 7. GloMax
®
Navigator software Home Screen.
2.C. Shutting Down the GloMax
®
Navigator Instrument
1.
Switch the instrument OFF using the On/Off switch on the back of the instrument.
2.
Shut down the GloMax
®
Navigator Software by tapping on the “x” in the upper right corner (Figure 7).
3.
Shut down the Tablet PC using normal Windows
®
8 shutdown procedures: Swipe in from the right edge of
the screen, select Settings, then select Power: Shut Down.
Note:
When not in use for a prolonged period of time, the Tablet PC should be powered OFF.
If the Tablet PC is switched ON but is not connected to its power supply, it will go to Sleep mode after
15 minutes of inactivity. This does not happen if the Tablet PC is connected to its power supply.
2.D. Operating the GloMax
®
Navigator System
1.
Open the door of the instrument and gently press the Microplate Sample Tray latch to release the tray cover
(Figure 5). If a lid is present, remove from plate. Insert an opaque 96-well plate such that well A1 of the
plate corresponds to the label “A1” on the plate tray (Figure 8).
2.
Close the sample tray cover and the instrument door.
!
