10
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM470 · 4/16
www.promega.com
1.F. Inspection and Unpacking (continued)
2.
Place the GloMax
®
Navigator Instrument on a flat, level surface.
3.
Ensure that the instrument is placed in a location that will allow you to meet the power requirement
specifications (100–240V AC, 50/60Hz; Section 1.B).
4.
Manually open the door of the instrument, and remove the interior foam packaging that prevents the optical
head from moving during shipment.
2.
Setting Up the GloMax
®
Navigator System
2.A. Setting Up the GloMax
®
Navigator Instrument and Tablet PC
1.
Unpack the Tablet PC from its shipping box.
2.
Place the Tablet PC in the Tablet Holder on the top of the GloMax
®
Navigator Instrument in the orientation
shown in Figure 4.
Fi
1351
6T
A
gure 4. Instrument front and Tablet PC holder setup.
3.
Secure the Tablet PC in the Tablet Holder by using the 2.5mm Wrench to screw the Tablet Mount Attachment
Piece into place.
4.
Ensure that the instrument On/Off switch is in the OFF position (Figure 5).
5.
Using the provided USB cable, connect the Tablet PC to the USB port on the back of the instrument (Figure 5).
6.
Connect the Tablet PC to its power supply, and then connect the Tablet PC Power Cable to a power outlet.
7.
Connect the Instrument AC Power Adapter to the back of the instrument and to a power outlet.
Note:
We recommend connecting the instrument to an uninterrupted power supply (~500VA).
