TR510E User’s Manual
48
Appendix E. Installation
Please install
DISK5212
Software before using TR510E series. DISK5212
includes [
DS Manager
] and [
TR510E Application Program
]. Setting
procedure is as follows.
1. Ethernet Interface TR510E:
1.
Open the program DS Manager. It will automatically detect the IP Address
of the TR510E on line.
Hub to TR510E (using cable WAS-1499)
(The default IP address is 1.0.0.1, if it doesn’t show up in the IP list window,
it may blocked by Firewall, you should disable the firewall protection
function temporarily, then click [Refresh] for show all IP in IP list window.
For DS Manager cannot detect the IP address in use currently on the LAN,
please make sure the IP address you set is not in use to avoid duplication.)
Summary of Contents for TR510E
