Promag TR510E, Manual, Page: 2 / 62

Attention! Firmware Management mode (FMM)
The TR510E has two different modes of operation. Normal mode provides
regular device functionality. Firmware Management mode (FMM) is provided for
internal firmware checkup and upgrades (see Section 5).
The Normal mode is entered by powering the TR510E up while not pressing
the IN button. Switching the TR510E on while holding the IN button or both IN
and OUT buttons down forces the unit into the FMM. The FMM mode of
operation cannot be exited other than by switching the TR510E off and back on
again.
Contents
Attention! Firmware Management mode (FMM) .................................................2
Contents ............................................................................................................2
1. Installing the TR510E .....................................................................................3
2. Using the TR510E ..........................................................................................7
3. Communications protocol...............................................................................8
4. Registers...................................................................................................... 27
5. Firmware Management mode ...................................................................... 41
6. Test mode .................................................................................................... 44
Appendix A. Possible Errors ............................................................................ 46
Appendix B. Interface connector pin assignment ............................................. 46
Appendix C. Specifications .............................................................................. 47
Appendix D. Ordering Information .................................................................... 47
Appendix E. Installation.................................................................................... 48