Promag TR510E, Manual, Page: 41 / 62

TR510E User’s Manual
41
5. Firmware Management mode
The TR510E also features new Firmware Management mode (FMM). FMM
allows you to quickly upgrade your TR510E’s internal firmware and also check
validity of the currently loaded firmware. Contact your dealer for the most recent
firmware upgrade files.
FMM itself has two sub-modes of operation: FMM/download mode and
FMM/check mode. FMM/download is entered by keeping the IN button pressed
while the TR510E is powering up. FMM/check mode is entered by holding both
IN and OUT buttons pressed while the TR510E is powering up.
To upgrade the firmware, you will need a new firmware file and a terminal
software for PC capable of transferring files using Xmodem protocol (Checksum
version).
Downloading new firmware (FMM/download)
All TR510E firmware files have a fixed size of exactly 64K (65536 bytes).
The list of popular and widely available terminal programs includes
HyperTerminal for Windows, QModem , and Term95 . But please know that
these programs communicate with terminal equipment by serial port
(RS232), so you should create a virtual serial port at your PC site by using
our supply software VSP manager; Please see the detail by manual of
“Quick Start Guide”. Procedure below assumes the use of HyperTerminal
which is a part of a standard Windows-95/98/2000 distribution.
To upgrade the TR510E’s internal firmware:
•
Switch the TR510E off
•
Make sure that the TR510E which you want to update new firmware
and the HUB are interconnected with a network cable
•
Launch HyperTerminal and configure it as follows:
o
When Connection Description dialog opens, type any string (1
character minimum) and press OK
o
When Connect to dialog opens, select an appropriate COM port
from the Connect Using drop-down box (for example, “Direct to
COM3” )
o
When COMx Properties dialog appears, set communications
parameters as follows: Bits per second: 19200, Data bits: 8,