3
1. Installing the TR510E
DC Jack
Comm. Port
Magnetic/ barcode
head on this side
IN button & LED
OUT button & LED
The TR510E can be used either as a wall-mount (default, see Figure above)
or desktop device. Machine needs to be rotated 180 degrees when used on a
desk. For this reason, the TR510E comes with two different LED plates (with
their artworks rotated 180 degrees with respect to each other). Machine’s LED
can also display time and other data in a “normal” (wall-mount), or desktop
fashion. There is an orientation setting provided that allows you to select display
mode (see Section 4).
Wall-mount and desktop operation
The TR510E supports Ethernet 10BaseT interface for single-terminal
communications or multi-terminal communications. The TR510E is designed to
attach directly to the RJ45 10BaseT Ethernet connector. Standard magnetic
circuitry (YCL part 20F001N) has been included onboard to provide a “glue-
less” interface to the Ethernet network.
PC interface
Most Ethernet installations require cables of substantial and variable length,
so you will probably need to make your own cables. For testing purpose
PROMAG supplies two kinds of Ethernet cables: device-to-hub (WAS-1499) for
connections through a standard Ethernet hub, and device-to-device (Was-1498)
for connections without a hub (i.e. directly from one Ethernet device to another).
Summary of Contents for TR510E
