Promag TR510E, Manual

Page: 27 / 62

27
4. Registers
The TR510E feature 3 groups of programmable “registers”. Basically,
registers are the TR510E’s functioning parameters (Settings). Group-1 registers
can be written to using the C-command, and read from using the B-command;
Group-2 registers can be written to using the P-command, and read from using
the Q-command; Group-3 registers can be written to using the J-command, and
read from using the K-command (see Section 3 for details).
Table below lists all available group-1 registers:
00H LED display mode (0: wall-mount, 1:desktop)
01H Bell duration in seconds (00H-FFH)
02H-21H Bell table, times (total of 32 registers)
22H-41H Bell table, enable/disable (total of 32 registers)
42H Event selection mode, free (IN or OUT), IN only, OUT only,
or Scheduled
43H Relay function (0: for Alarm, 1: for Door unlock)
44H-63H Event table, times (total of 32 registers)
64H-83H Event table, event selection (IN: 1, OUT: 0)
84H Bell table mode, Everyday or Week (Everyday: 0, Week: 1)
85H-86H Daylight Saving Time (start-date ~ end-date)
87H Enable or Disable Daylight Saving Time function
88H Door unlock duration in seconds (00H-FFH)
89H Prefix to match (0-16 characters)
8AH From character (extract from a character position in the ID-
code, this setting is from 1 to 37)
8BH Number of characters (extract a portion of code from ID-
card, this setting is from 1 to 37)
8CH Allow or disallow record duplication (1:allow, 0:disallow)
8DH-92H Unexpected ID-code (0-37 characters)
Table below lists all available group-2 registers:
00H-1FH Bell table of Sunday, ‘time’ field (32 registers)
20H-3FH Bell table of Monday, ‘time’ field (32 registers)