Installation and Wiring
4-3
PL-5700 Series User’s Manual
• The PL is intended to be mounted vertically, to allow natural ventilation. The PL can
also be tilted up to 30 degrees, if needed.
• Avoid placing the PL next to other devices that
might cause overheating.
• The PL’s operating temperatures are a maxi-
mum 40°C for the PL-5700T1-24VC, PL-
570*S1 and PL-570*L1, and 45°C for the PL-
570*T1.
• Keep the PL away from arc-generating devices such
as magnetic switches and non-fuse breakers.
Must be 30
degrees
or less
OK
OK
OK
(Top and bottom faces)
Mounting hole
Side panel
Mounting panel
Insert the PL into the front of the mounting panel
Secure the rear panel of PL in place with the mounting brakets (4)
Hook the mounting brackets into the two mounting holes on the top face, and the two
holes on the bottom face of the PL’s body.
1.
