Optional Units and Expansion Boards
3-7
PL-5700 Series User’s Manual
When the Heat Protector is NOT Needed
3) Attach the PL-HD000 and secure it in
place with the two screws given.
Be sure the side
with the seal is
facing up.
PL-HD000
4)
Insert the cable into the PL - HD000 unit’s
connector. Be careful that the pins are
aligned as shown in the drawing here. (The
four pins on the far right will be unused)
5)
Place the cover back in
place, and fasten its screws.
CAUTION: If the pins are in-
serted incorrectly, the unit may
be damaged
<PL-HD000 Connector>
Do not use
these pins
Connect the
cable to here
