5-1
PL-5700 Series User’s Manual
Chapter
5
System Setup
5-1 Setup Procedures
5-2 System Parameters
This chapter describes how to configure the system before operating the PL, and
lists the system parameters.
Key list
Lists the keys available for setting up the PL.
Help display area
Provides detailed information about the item at the cursor position.
System set-up area
Lists system parameters for the selected menu.
Menu bar
Contains four menus: Main, Advanced, Power and Exit.
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main
Advanced Power Exit
System Time: [15:00:00]
System Date: [08/25/1995]
Diskette A: [Not Installed]
Diskette B: [Not Installed]
IDE Adapter 0 Master (None)
IDE Adapter 0 Slave (None)
Video System [EGA / VGA]
Memory Cache
Memory Shadow
Boot sequence: [C: then A:]
Back Light/Contnast: [Standard/4]
System Memory: 640KB
Extended Memory: 7168KB
Item Specific Help
Attempts to
automatically detect
the drive type for
drives that comply with
ANSI specifications.
F1 Help
↑↑↑↑↑
↓↓↓↓↓
Select Item -/+ Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select Sub-Menu F10 Previous Values
← →
5-1 Setup Procedures
1. Turn on the PL’s power.
2. When the message “Press <F2> to Enter SETUP” appears, press the [F2] key.
The SETUP utility will start and the following screen will appear.
