Installation and Wiring
4-6
PL-5700 Series User’s Manual
^
^
^
φφφφφ
3.2 mm or larger
Max. 6.0 mm
Follow the instructions below when connecting the power cord.
Transparent
cover
Black
White
Green
L
N
FG
FG
100V
AC
24V
DC
L
N
FG
FG
100V
AC
24V
DC
+
-
+
-
Black
White
Green
L
N
FG
FG
100V
AC
24V
DC
+
-
Black
White
Green
1. Make sure the POWER switch is
OFF. Then, remove the power in-
put terminals’ transparent cover,
located on the rear panel of the PL.
2. Loosen and remove the middle three
screws from the terminal board. Align
crimp terminals to each screw hole, and
tighten the screws.
• Crimp Terminal Types :
V1.25-3, by J.S.T. or equivalent (JIS
standard part number :
RAV1.25-3
)
• Crimp terminals must be the same
as shown below.
• The colors in the figure above are
for the cable which came with the
PL.
3. Reattach the protective transparent
cover.
