Optional Units and Expansion Boards
PL-5700 Series User’s Manual
3-14
6
Installing the IDE Slave Adapter
(PL-SA000)
1. Remove the HDD cover.
See step 1 in “3
Installing the HDD unit (PL-HD000), or
Flash File Disk Unit (PL-FF000/FF001).”
2. Unplug the PL-HD000 cable.
3. Attach the PL-SA000 to the HDD con-
nector and PL-HD000 connector
(see
steps 2 and 4 in “3. Installing the HDD
unit (PL-HD000), or Flash File Disk Unit
(PL-FF000/FF001).”
If you have difficulty inserting the connec-
tor, remove the PL-HD000, connect the
cable, and then re-install the PL-HD000.
Connect the DC power cord which came
with the PL-SA000 to the DC OUT con-
nector.
4. To connect a commercially available CD-
ROM drive, first attach the PL-SA000’s
CD-ROM drive connection cable to the
PL-SA000. Then, connect the CD-ROM
drive connection cable to the IDE INTER-
FACE on the CD-ROM drive.
Last, con-
nect the DC power cord to both the DC IN-
PUT on the CD-ROM drive and the PL.
Make sure that pin 1 of the CD-ROM drive
connection cable matches pin 1 of the IDE
INTERFACE.
To DC INPUT
CD-ROM
drive
^
^
To IDE
INTERFACE
CD-ROM drive
connection cable
DC power cord
To the
DC OUT
connector
(top)
PL-SA000
^
^
^
To the
PL-HD000
(top)
To
the HDD
connector
(bottom)
Red line
Remove the PL-
HD000 cable
PL-HD000
<PL-HD000 Connector>
For DC OUT
connector
For PL-HD000
connector
