Optional Units and Expansion Boards
PL-5700 Series User’s Manual
3-2
Commercially Available Products
• Check that your expansion board’s “foot” matches the width of the expansion
slot. Slot 1 is 20 mm wide, and slots 2 and 3 (3-slot PLs only) are 25 mm wide.
• Since the PL does not supply -5 and -12 V current, ISA(AT)-bus compatible
boards requiring -5 or -12 voltage are not available.
• Other commercially available boards may not be compatible with Digital’s PL
unit. Installing incompatible boards may result in either damage to or failure of
the PL and will void your warranty.
<Main Memory>
Be sure to use only DIM modules manufactured by Digital. Installing other DIM
modules may result in either damage to or failure of the PL, and will void your
warranty.
^
^
^
Produc t
Des cription
Installation Area
ISA (AT)
bus
c ompatible
board
Slot 1 on all PLs can accommodate boards up to 210 mm
wide. For 3-slot type PLs (PL-5700*1), slots 2 and 3 can
accommodate boards up to 160 mm wide.
Width
Mount facing this
direction
P lugs into PL's
expansion slot.
