8913204
Gas Pressure Washer
V1.0
6
For technical questions call 1-800-665-8685
9. DO NOT disconnect the high-pressure hose from the pump and spray
gun while the system is pressurized.
10. Always ensure that the spray gun, nozzles, hoses and fittings are
correctly attached before starting the engine.
11. NEVER hold onto the hose or fittings during operation. This can allow
pressurized water to escape and inflict an injury.
12. DO NOT plug this pressure water into a hot water supply. This
pressure washer is designed for cold water use only.
13. Prior to starting the pressure washer in cold weather, be sure ice has
not formed in any part of the equipment.
14. Ensure the pressure washer is not covered during operation to avoid
overheating the motor.
15. This pressure washer is capable of producing pressures up to 3,100
PSI. To avoid property damage and personal injury, do not operate the
pump with components rated for less than 3,200 PSI working pressure.
16. If connecting the pressure washer to a portable water system, ensure
the water system is protected against backflow.
17. NEVER attach or remove wand or hose fittings while system is
pressurized.
18. Never transport or make adjustments to this unit while it is running.
19. Do not allow the high pressure hose to come in contact with any
hot part of the unit. The hose might be damaged, possibly causing
it to burst or leak under high pressure.
20. Shut off the pressure washer if it is leaking water. Discharge all
pressure before tightening fittings or having repair work done by a
qualified technician.
SPRAYING PRECAUTIONS
DANGER! The pressure washer produces fluid pressures and
velocities strong enough to penetrate human and animal flesh
that will result in serious injury or amputation with some nozzles.
DANGER! NEVER aim the pressure washer spray gun in the
direction of people or animals, even if the power and water
supply are turned off. High velocity fluid spray can cause objects
to break, propelling particles at high speeds.
