8913204
Gas Pressure Washer
V1.0
14
For technical questions call 1-800-665-8685
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or
replaced by an authorized technician. Only use identical
replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
AFTER EACH USE
CHECK HIGH PRESSURE HOSE
WARNING! NEVER repair the high pressure hose. Repairs can fail
and will be weaker than the hose itself. A hose that fails while
under pressure can inflict a serious injury. Replace with a hose
that has a maximum pressure rating that exceeds the pressure
washer’s maximum output.
The high pressure hose can develop leaks due to wear, kinking or
misuse and abuse. Inspect the hose each time before using it. Check
the hose for cuts, leaks, abrasions or bulging spots. Also check the
couplings to ensure they are not loose. Replace the hose immediately if
any of these conditions exist.
CHECK SIPHON TUBE
Check the detergent siphoning tube for clogs, leaks or tears. Clean the tube
of clogs. Replace if damaged or it no longer fits the pump fitting tightly.
CHECK SPRAY GUN
Examine the hose connection to the spray gun and make sure it is
secure. Check that the trigger lock is in place to prevent accidental
spraying. Replace the spray gun immediately if the trigger lock is
damaged or will not remain in place.
