![background image](http://html.mh-extra.com/html/pro-point/8913204/8913204_manual_1607386035.webp)
V1.0
Gas Engine
8913204
Visit www.princessauto.com for more information
13
HOW TO CHECK OIL
1. Level the engine or the equipment the engine is mounted on.
2. Clean the oil fill area of any dirt and debris to prevent contamination that
can damage the engine.
3. The engine has a dipstick that is either part of the oil fill plug (O) or a
separate component (see Parts Identification).
3.1 Remove the dipstick (O) and wipe with a clean cloth.
3.2 Reinsert the dipstick into the filler neck until it rests on the opening’s
rim. Do not screw the oil fill plug back into the opening.
3.3 Remove the dipstick and check that the oil is between the Full and
Fill marks. Add or drain oil based on the measurement.
3.4 Reinsert the
dipstick and
either press firmly
to hold in place
or screw the oil fill
cap hand tight
HOW TO ADD OIL
IMPORTANT! Read the Engine Oil section before adding oil to
ensure that it is suitable for the engine.
1. Remove the oil filler cap (O) and place to one side.
2. Place a funnel into the oil fill neck. The funnel opening should be wide
enough to prevent the oil from collecting in the funnel’s cone.
3. Pour oil into the funnel. Allow the oil to settle for one minute and recheck
the level. Repeat until the desired level is reached.
4. Insert and hand tighten the oil filler cap.
5. Wipe up any spilled oil. Dispose of oil soaked rags in a proper hazardous
waste container.
HOW TO DRAIN OIL
WARNING! Draining oil from the engine may involve tipping it on the
side. This can cause fuel to leak into the oil compartment, creating
a potential fire hazard. Do not tip the engine while draining. If this is
unavoidable, drain the fuel from the engine before draining the oil.
Fig. 5
O