V1.0
Gas Pressure Washer
8913204
Visit www.princessauto.com for more information
9
RISK OF CHEMICAL BURN
DANGER! Use of acids, toxic or corrosive chemicals, poisons,
insecticides, or any kind of flammable solvent with this product
could result in serious injury or death.
1. DO NOT use acids, gasoline, kerosene, or any other flammable
materials in this product. Use only household detergents, cleaners
and degreasers recommended for use in pressure washers.
2. Wear protective clothing to protect eyes and skin from contact with
sprayed materials.
3. DO NOT use chlorine bleach or any other corrosive compound.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Pressure Washer • Quick-Connect Spray Nozzles (5)
• 50 ft Hose
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
1. Attach the high pressure hose hanger (#15) to the upper frame
handle (#14) using two locknuts (#13). Tighten securely (Fig. 1).
2. Slide the upper frame handle (#14) over the two upright tubes on
the frame (#2) and press down until Handle is seated and two
detent pins snap into place (Fig. 2).
3. Slide the front frame handle (#20) over the two angled tubes on
the Upper frame handle and press down until handle is seated and
two detent pins snap into place (Fig. 3).
