Pro-face Pro-face ST Series, User Manual

Page: 126 / 131

Chapter 8 Maintenance
8-3
(3) Attach the new gasket to the ST. Be sure to insert
the gasket into the ST's groove so that the gasket’s
groove sides are vertical.
(4) Check if the gasket is attached to the ST correctly.
• The gasket must be inserted correctly into the groove for the ST's moisture resis-
tance to be equivalent to IP65.
• Be sure the gasket's seam is not inserted into any of the unit's corners, only in
the straight sections of the groove. Inserting it into a corner may lead to its even-
tually tearing.
• To ensure the installation gasket's maximum level of moisture resistance, be sure
the gasket's seam instead as shown into the panel's button face.
• The upper surface of the gasket should protrude approximately 2mm out from the
groove. Be sure to check that the gasket is correctly inserted before installing the
ST into a panel.
2.0
Unit:mm
Seam