Pro-face Pro-face ST Series, User Manual

Page: 2 / 131

1
Preface
Thank you for purchasing the Pro-face ST Series programmable operator interface (hereafter referred to as the "ST unit").
ST Series units are small-sized, low-cost operator interfaces equipped with high-resolution 3.8 inch QVGA displays.
Now, a compact, full-graphic display is available for you.
Please read this manual carefully as it explains, step by step, how to use the ST correctly and safely.
Also, in this manual's examples, the Mitsubishi MELSEC-AnA Series PLC is referred to, whenever possible, in a point-
to-point connection.
© Copyright 2005 Digital Electronics Corporation. All rights reserved.
All Company/Manufacturer names used in this manual are the registered trademarks of those companies.
Note
1. It is forbidden to copy the contents of this manual, in whole or in part, except for the user’s personal use, without
the express permission of Digital Electronics Corporation of Japan.
2. The information provided in this manual is subject to change without notice.
3. This manual has been written with care and attention to detail; however, should you find any errors or omissions,
please contact Digital Electronics Corporation and inform them of your findings.
4. Please be aware that Digital Electronics Corporation shall not be held liable by the user for any damages, losses,
or third party claims arising from any uses of this product.