Pro-face Pro-face ST Series, User Manual

Page: 6 / 131

5
Display Device
Unit Disposal
Be sure the ST's rated voltage is within the designated range, and that the power terminal lines are correctly attached.
If the voltage supplied differs from the rated voltage, or incorrect wiring or grounding is performed, it may cause a
fire or unit malfunction.
Use only the designated torque to tighten the ST's terminal block screws. If these screws are not tightened firmly, it
may cause a short-circuit, fire, or ST malfunction.
Be careful that metal filings and wiring debris do not fall inside the ST, since they can cause a fire, ST malfunction,
or incorrect unit operation.
The liquid crystal panel contains a powerful irritant and if for any reason the panel is damaged and this liquid con-
tacts any part of your body, be sure to wash that area with running water for 15 minutes. If any of this liquid enters
your eye, flush your eye for 15 minutes with running water and contact a physician.
When this unit is disposed of, it should be done so according to your country's regulations for similar types of indus-
trial waste.
This mark is applicable only in Taiwan.