Pro-face Pro-face ST Series, User Manual

Page: 19 / 131

ST Series User’s Manual
1-2
1.1 Prior to Operating the ST
Be sure to follow these steps when creating projects for the ST unit.
(1) Preparation
Before using the GP, check that all required hardware is present and read all specification, wiring, and
installation information.
(2) Select and the PLC types
Using the input areas provided, select the ST PLC types and the PLC types to be used.
(3) Create Screen/ Run Screen Setup
Setup the screen and tags in your screen editing software according to your Screen Design.
(4) Transfer Screen Data
Transfer the data from the Screen editor software on your PC to the ST unit using the Data Transfer
Cable.
(5) GP/Host Connection
Set up the ST so that it can receive data from the Host (PLC).
(6) Connect the ST
Link the ST with the host (PLC) using the appropriate connection cable (different cables may be neces-
sary for different hosts), and then operate the unit.
SEE
Specifications (Page 2-1) and Installation and Wiring (Page 3-1)
SEE
GP-PRO/PBIII for Windows Operation Manual and Tag Reference Manua
SEE
GP-PRO/PBIII for Windows Operation Manual and Tag Reference Manual
SEE
Initializing the ST (Page 6-1), and GP-PRO/ PBIII for Windows Device/PLC Connection Man-
ual
SEE
GP-PRO/PBIII for Windows Device/PLC Connection Manual