230
Issue 21
TX500 series technical manual
The Compact Flash card should contain only the following files: -
Figure 15: Compact Flash Card Files
File
Function
PA658n.EXE
The main application. The n denotes version A to Z
PA709n.INI
The main application INI file. Contains information about
EPLD files to be loaded.
PA700n.RBF
EPLD file #1 1080i 59.94. The n denotes version A to Z
PA701n.RBF
EPLD file #2 1080i 60. The n denotes version A to Z
PA702n.RBF
EPLD file #3 1080i 50. The n denotes version A to Z
PA703n.RBF
EPLD file #4 720p 59.94. The n denotes version A to Z
PA704n.RBF
EPLD file #5 720p 60. The n denotes version A to Z
The INI file contains information about the EPLD files that could be loaded at power-up. The
INI file should appear as follows:-
# This file contains all of the available EPLD file options to a maximum of 16
# The file should be in DOS 8.3 format
# At present only the first five options have been implimented - PA700 to PA704
# The other eleven have dummy filenames PAXXXX.XXX
# Comments must be preceeded by an '#'
# Blank lines are allowed
# SYSTEM CONFIG’ switches[4..1] = "0000" - Standard 1080i/59
PA700n.RBF
# SYSTEM CONFIG’ switches[4..1] = "0001" - Standard 1080i/60
PA701n.RBF
# SYSTEM CONFIG’ switches[4..1] = "0010" - Standard 1080i/50
PA702n.RBF
# SYSTEM CONFIG’ switches[4..1] = "0011" - Standard 720p/59
PA703n.RBF
# SYSTEM CONFIG’ switches[4..1] = "0100" - Standard 720p/60
PA704n.RBF
# SYSTEM CONFIG’ switches[4..1] = "0101" - Undefined at present
PAXXXX.XXX
# SYSTEM CONFIG’ switches[4..1] = "0110" - Undefined at present
PAXXXX.XXX
# SYSTEM CONFIG’ switches[4..1] = "0111" - Undefined at present
PAXXXX.XXX
# SYSTEM CONFIG’ switches[4..1] = "1000" - Undefined at present
PAXXXX.XXX
