HU-TX500-TECH
193
TX500 series technical manual
Note that the password, when prompted, is:
*+”}.?
To restore the configuration from the same PC, the following command is used:
PUT TX500Series1.cfg
The session is closed by typing ‘Disconnect’, after which the TX500 must be put back into
Normal Mode (using Switch 6), and resetting the 2330 card.
10.2.2.2
From Internet Explorer
After launching Internet Explorer, type in ‘ftp://’ followed by the IP address of the TX500.
Type in the following user name and password when prompted:-
User:
Pro-Bel
Password: *+”}.?
