manualshive.com logo in svg

PRISMJET 54 Gen2, Operation Manual

Share
Download
PRISMJET 54 Gen2 Operation Manual Download Page 141

PrismJET 54 Gen2  OPERATION MANUAL

Panel setup menu

5.1  Setup menu

151

Slant Check

Sets up slanting detection during media loading.
• [Enter] key: shifts to the sub menu.

5.1.14 Slant Check menu

Auto Cleaning

Sets up the time for auto cleaning during standby, before printing, and during printing.
• [Enter] key: shifts to the sub menu.

5.1.15 Auto Cleaning menu

Longstore

Wash the print head with the cleaning fluid.
• [Enter] key: shifts to the sub menu.

 5.1.16 Longstore menu

CR Maintenance

Performs maintenance.
• [Enter] key: shifts to the sub menu.

5.1.17 CR Maintenance menu

Initialization

Returns the settings of the printer to default.
• [Enter] key: shifts to the sub menu.

5.1.18 Initialization menu

IP Address

Sets the IP address of the printer.
• [Enter] key: shifts to the sub menu.

5.1.19 IP Address menu

Subnet Mask

Sets the subnet mask of the printer.
• [Enter] key: shifts to the sub menu.

5.1.20 Subnet Mask menu

Gateway

Sets the gateway.
• [Enter] key: shifts to the sub menu.

5.1.21 Gateway menu

Header dump

Set whether or not to print the dump data of print data.
• [Enter] key: shifts to the sub menu.

5.1.22 Header Dump menu

Start Feed

Rewinds or feeds the media the amount specified by the set value.
• [Enter] key: Moves to the sub menu.

5.1.23 Start Feed Menu

Alert Buzzer

Selects how to turn off the printer beep sound when an error occurs.
• [Enter] key: shifts to the sub menu.

5.1.24 Alert Buzzer menu

Front Interlace

Sets the media edge treatment function.
• [Enter] key: shifts to the previous menu.

5.1.25 Front Interlace Menu

Nozzle Select

You can set whether to reduce the print head nozzles for printing.
• [Enter] key: shifts to the sub menu.

5.1.26 Select Nozzle menu

Temporary

Displays the menus which have been set to hide in the Menu Option menu temporarily.
• [Enter] key: returns to the previous menu with all set up items displayed.
• [Cancel] key: returns to the previous status in the Selection menu when the Setup menu is 

displayed.

5.4 Menu Option menu

Setup item

Description

Summary of Contents for 54 Gen2


















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands