PRISMJET 54 Gen2, Operation Manual

Page: 65 / 305

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.6 Adjust Print 75
3.6.1 Periodic “Adjust Print” Message Prompt
The message appears on the operation panel every 30 days to prompt you to run an adjustment print.
1. The error LED in the operation panel flashes, and beep sound.
• “Perform Adjust Print” is displayed on the operation panel.
2. Press the [Enter] key on the operation panel.
• When the message disappears, print an adjust print pattern.
3.6.2 Auto Adjust Print
3.6.3 Standard Adjust Print
3.6.4 Custom Adjustment Pattern
3.6.2 Auto Adjust Print
Perform the automatic adjustment using the embedded color sensor.
This menu is made up with the following menus.
Follow the procedure below to adjust print quality.
1. Turn ON the printer and load the roll media.
3.4.2 Setting Roll Media
Menu Name Description
All Perform automatic adjustment for all patterns (A to F) using the color sensor.
Standard Perform automatic adjustment for the currently selected print mode using the color
sensor (calibrate the same print mode as "
3.6.3 Standard Adjust Print ").
Pattern A to F Choose the adjustment pattern between A and F for automatic adjustment.