PRISMJET 54 Gen2, Operation Manual

Page: 218 / 305

Maintenance PrismJET 54 Gen2 OPERATION MANUAL
228 6.1 Replacing consumable components
6.1.3 Replacing Cross-cut Blade
This section describes when and how to replace the cross-cut blade.
(1) Replacement time
Replace the cutter blade when the following situation occurs.
a. When the paper is not cut smoothly
b. When the cut surface is feathered, etc
(2) Type
Our genuine cutter that is compatible with the printer is as follows.
(3) Replacing steps
Follow the procedure below to replace the cutter.
1. If the printer is turned ON, make sure the following.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• “Menu 1: Setup>” is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
Description Model No.
Cutter replacement blade VJ-CB