PrismJET 54 Gen2 OPERATION MANUAL
Handling the printer
4.2 Media
131
CAUTION
• While “Warming Up” is displayed, do not touch Platen and Media guide. They
become very hot and you could burn yourself.
NOTE
•
You can start printing during warming up.
4.4.8 Start Printing during Warm up
•
“Printing” is displayed on Operation panel.
(The printer starts printing after warming up is complete.)
•
Starts micro adjustment printing.
•
In the pattern, look for a place that has least white lines or overlapping in images.The number
printed below the adequate pattern is the micro change value.
•
After the micro adjustment printing is completed, “Micro Change: 0.00%” is displayed on
Operation panel.
7. Sets up Micro Adjustment Change.
a. Press the [+] key or [–] key and enter the micro adjustment value according to the printing result
in Step 6.
b. Press the [Enter] key on Operation panel.
•
The micro adjustment value is saved. (The saved micro change value will be always shifted
to the base value for the pattern printing.)
•
“PF5: Micro Print” is displayed on Operation panel.
•
The adjustment of media feed adjustment value is complete.
Summary of Contents for 54 Gen2
Page 1: ......
Page 2: ......
Page 304: ...Appendix PrismJET 54 Gen2 OPERATION MANUAL 314 8 3 Options Supply list...
Page 305: ......
