PRISMJET 54 Gen2, Operation Manual

Page: 34 / 305

Before using PrismJET 54 Gen2 OPERATION MANUAL
44 3.3 Installing ink cartridges
NOTE
• Do not share the ink cartridge once installed with another printer. The cartridge will not be usable
from that time onward.
• Use genuine ink cartridges or ink bags for charging.
This printer is designed to use genuine ink cartridges or ink bags.
If you use ink cartridges or ink bags which are not authorized by SIGNWarehouse or MUTOH,
• Printing might become blurred and the end of the ink in the cartridge or bag might not be detected
correctly.
• Any problems caused by using an ink cartridge or bag other than those recommended above will
not be covered by the warranty, and repair expenses will be paid by the customer.
• For types and details of ink cartridges and ink bags, contact SIGNWarehouse or your authorized
PrismJET reseller.
• Do not give ink cartridges or ink bags strong shakes.
Doing so may cause ink leakage.
• Do not disassemble ink cartridges or ink bags.
A disassembled ink cartridge cannot be used.
• Make sure to use the dedicated cleaning fluid
(Model number: PRNI-SW-EIP-220-CLN-MUT).
• Before installing the ink cartridges or ink bags, Agitate it gently.
Doing so will preserve print quality.
• When an ink cartridges or ink bags is moved from a cold place to warm place, keep the ink
cartridges or ink bags for three hours or more in the new printing environment before printing.
• Do not insert or remove the ink cartridges or ink bags more than 10 times.
If the ink cartridge has been removed/inserted more than 10 times, it cannot be used even though
ink remains.
• The ink cartridges and ink bags for this printer have dedicated IC chip on them.
If removing/inserting the ink cartridges or ink bags and high capacity pack adapters (option) in the
following situations, the information within the IC chips may be damaged and the cartridges cannot
be used.
• During printing
• For several seconds after inserting the ink cartridge