PRISMJET 54 Gen2, Operation Manual

Page: 105 / 305

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.6 Adjust Print 115
• An micro adjust print pattern is printed.
(Starts printing after warming up is complete.)
• For the Adjust print pattern, the same patterns will be printed repeatedly on both sides and center
of the media.
4. Check the print results on both sides and center of the media and select the number that looks most
aligned between 1 and 7.
• “6” is selected in the next printing sample.
NOTE
• “4” represents the current setting value.
• When the line is aligned, the bold line on its left side does not have a white vertical line.
• “PatternA: 4” is displayed on Operation panel.
Pattern name
1 2 3 4 5 6 7
Print Information
Bi dir
Low H.Height
normal speed
large drop family
Not adequate Adequate
Not adequate